Mini Floorstand for Eyegaze

Mini Floorstand for Eyegaze

A new small footprint floor stand intended for wheelchair users with Eyegaze devices (up to 4kg). The base, designed and manufactured by Mounts and More, is low enough and narrow enough to enable it to go under most footrests and between most wheelchair front wheels. This allows an eyegaze device to be positioned close enough for most users.

This model has been designed for use with eyegaze/eye tracking devices (up to 4kg) where direct access or touch is not required and as such features an articulating quick release base connected directly to the upright post. In combination with the upright post being slightly offset towards the rear, this keeps the weight of a device directly over the centre of the base. The articulating joint in the quick release base enables a device to be positioned at the precise angle each individual user needs.

Features:

• Compact base size: 20" x 15" (51cm x 38cm).
• Ground clearance of 9mm (between ground and underneath of base).
• 3.125" (8cm) Base height, from the ground to the top of the wheel supports. This is the same base height as the Daessy Rolling Mount.
• Base weight of 10kg.
• Daessy Medium Rolling Mount Post gives height adjustment from 34.5" to 54.5" (87.5cm to 138cm) - the height being the position of the quick release base above the ground.
• Supplied as standard with Removable Adaptor to quickly attach or remove the upright post. Can be supplied with manual bolt fixing if preferred.
• Articulating Quick Release attached directly to the upright post intended for Eye tracking devices up to 4kg.
• Carry bags available.